Customized Chef furniture with rounded edge - Stainless steel furniture 1 sink on feet

Entirely in AISI 304L stainless steel
Half-sized back to insert pipework
2 hanging sliding doors - Lock - No shelf
Work top : in AISI 304L 1.5 mm thickness stainless steel, reinforced with a 19 mm thick melamine panel water repellent
Welded corners - Front 20 mm curve, dropped 60 mm
Backrest 100 x 20 mm rounded on the base and at a 30°angle welded on each side of the splashback
Sink : stainless steel, welded, L x D x H : 400 x 400 x 250 mm
Supplied with plug, simple overflow pipe and PVC U bend.
Tap hole Ø 31 mm (optional cover)
Black ABS feet H 155 mm adjustable up to 70 mm
Customized : on request consult us

Chef furniture - Single panel doors and sides :

Designation	L x D x H mm	Code	Qty
Sink on the right or left	900 x 700 x .../1000	MH2-10C
Sink on the right or left	900 x 700 x 1001 to 1200	MH2-12C
Sink on the right or left	900 x 700 x 1201 to 1400	MH2-14C
Sink on the right or left	900 x 700 x 1401 to 1600	MH2-16C
Sink on the right or left	900 x 700 x 1601 to 1800	MH2-18C
Sink on the right or left	900 x 700 x 1801 to 2000	MH2-20C
Sink on the right or left	900 x 700 x 2001 to 2200	MH2-22C
Chef furniture - Double panel doors and sides :

Designation	L x D x H mm	Code	Qty
Sink on the right or left	900 x 700 x .../1000	MH3-10C
Sink on the right or left	900 x 700 x 1001 to 1200	MH3-12C
Sink on the right or left	900 x 700 x 1201 to 1400	MH3-14C
Sink on the right or left	900 x 700 x 1401 to 1600	MH3-16C
Sink on the right or left	900 x 700 x 1601 to 1800	MH3-18C
Sink on the right or left	900 x 700 x 1801 to 2000	MH3-20C
Sink on the right or left	900 x 700 x 2001 to 2200	MH3-22C

Entirely in AISI 304L stainless steel
Half-sized back to insert pipework
2 hanging sliding doors - Lock - No shelf
Work top : in AISI 304L 1.5 mm thickness stainless steel, reinforced with a 19 mm thick melamine panel water repellent
Welded corners - Front 20 mm curve, dropped 60 mm
Backrest 100 x 20 mm rounded on the base and at a 30°angle welded on each side of the splashback
Sink : stainless steel, welded, L x D x H : 400 x 400 x 250 mm
Supplied with plug, simple overflow pipe and PVC U bend.
Tap hole Ø 31 mm (optional cover)
Black ABS feet H 155 mm adjustable up to 70 mm
Customized : on request consult us

Panelled in stainless steel trim :

Designation	Code	Qty
Extra cost for interior fittings (bottom shelf + partition) for Chef furniture New	POPT16
Wheels - Feet :

Designation	Code	Qty
4 stainless steel feet, adjustable up to 30 mm - Add "X" to the end of the reference	4X1
4 stainless steel wheels Ø 125 mm, (2 with brake) - Add "RX" to the end of the reference.	4RX1

Customized Chef furniture Stainless steel sink welded - 400 x 400 x 250 mm - right or left