Constant level trolleys
Constant level trolleys
For hot round plates ( CNCA )
- Interior and exterior made in stainless steel
- Non-ventilated static heating
- 2 cylinders delivered with 2 stainless domed covers
- For plates from Ø 200 to 260 mm
- 65 plates per cylinder
- Max. total load: 140 kg
- Thermostatic control from 0° to 100°C (with backup thermostat)
- Dummy socket to hold spiral mains cable
- 4 composite wheels Ø 125 mm pivoting, 2 with brakes
- Protective buffers
- 230 V single phase - 50/60 Hz - 1400 W
For drawers 500 x 500 ( CNCC ) :
- Stainless
- Runs on rollers fitted on waterproof ball bearings
- Maximum weight: 120 kg
- For 7 dish drawers 500 x 500 x H 100 mm
- 4 composite wheels Ø 125 mm pivoting, 2 with brakes
- Protective buffers
- Enclosure presentation level is adjusted by removing the springs
For trays ( CNCP ) :
- Stainless construction
- Runs on rollers fitted on waterproof ball bearings
- 4 composite wheels Ø 125 mm pivoting, 2 with brakes
- Protective buffers
- 100 to 120 standard trays 460 x 360 mm, 480 x 370 mm, GN 1/1 530 x 325 mm
- 200 to 240 fast-food trays 350 x 270 mm (delivered without trays)
- Max. load: 120 kg (from 65 kg, the support tray is stopped against the interior structure)
- Automatic stacking adjustment by removing the springs according to weight of trays used.
For trays - special conveyor ( CNCPC) :
- Ditto trolleys for type CPNP trays, plus:
- Equipped with 2 side walls in 1.5 mm stainless steel to guide the trays at the end of the conveyor
- Max. load: 120 kg
- Catalogue :
- Racks & trolleys